Promotion
Specifications
- Manufacturer: Honda
- Model: Trimmer Attachments UMC425LAC1
- Type: Trimmers
- Engine Type: Honda GX25, mini 4-stroke, OHC, single cylinder air-cooled multi-position (360°)
- Honda Engine Model: GX25T
- Displacement: 25 cc (1.53 CID)
- Bore & Stroke: 35 x 26 mm (1.4 x 1 in.)
- Maximum Net Torque: 1.0 N.m (0.74 lbf-ft.) @ 5,000 RPM
- Idle Speed: 3,100 ± 200 RPM
- Max. No-Load RPM: 10,000 RPM
- Ignition System: Transistorized magneto ignition (electronic)
- Spark Plug: CMR5H (NGK)
- Cooling System: Forced air
- Starting System: Recoil starter
- Stopping System: Ignition primary circuit ground
- Carburetor: Diaphragm type w/ fuel pump
- Recommended Fuel: Regular unleaded gasoline (86 Octane or higher)
- Fuel Capacity: 0.53 L (18.7 fl. Imp. oz.)
- Clutch Drive Type: Centrifugal Twin Shoe-Clutch
- Clutch Size: 54 mm (2.125 in.) Diameter
- Clutch Engagement: 4;200 ± 200 RPM
- Air Cleaner: Semi-dry type
- Lubrication System: Oil mist
- Oil Capacity: 80 cc (2.82 fl. Imp. oz.)
- Recommended Oil: SAE 10W30 API service classification SJ or later
- Overall Length (without attachment): 113.5 cm (44.7 in.)
- Overall Width: 31.5 cm (12.4 in.)
- Overall Height: 24.5 cm (9.6 in.)
- Dry Weight (without attachment): 5.1 kg (11.2 lbs.)
- Handle Type: Loop
- Throttle Control Type: Two-motion trigger type
- Engine Stop Switch: Slide type switch
- Drive Shaft Type: Rigid Steel
- Shaft Support: Rubber Mounted Bushings (4)
- Main Pipe Diameter: 24 mm (0.94 in.)
- Main Pipe Thickness / Material: 2 mm (0.08 in.) Aluminum
- Shoulder Harness: Standard
- Safety Goggles (A.N.S.I Std.): Standard
- Blade Barrier Kit: Standard